Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
© 2001 Goodson Shop Supplies
PPE-7082 Piston Pin
Removal/Installation Fixture
nstructions
PPE-7082
This set quickly and easily removes or installs press fit piston pins of
.860" to 1.062" in diameter in pistons of 31/8" to 4 3/8" in diameter. Use
this set with a press having a minimum capacity of 5 tons.
Please read instructions before using.
July 2013
Publicidad
Resumen de contenidos para Goodson PPE-7082
- Página 1 This set quickly and easily removes or installs press fit piston pins of .860" to 1.062" in diameter in pistons of 31/8" to 4 3/8" in diameter. Use this set with a press having a minimum capacity of 5 tons. Please read instructions before using. © 2001 Goodson Shop Supplies July 2013...
- Página 2 Warning Piston Pin Installation Figure 1 Figure 6 This tooling is designed to operate properly 1. Thread stop plug into the bottom of the with presses having a capacity of up to 10 receiving tube approximately half way. tons, exceeding this capacity could dam- See Fig.
- Página 3 .860” a 1.062” en diametro de pistónes de 3 1/8” a 4 3/8” en diametro. Use este equipo con una prensa teniendo la capaci- dad minimo de 5 tonaladas. Leer las instrucciones antes de usar. © 2001 Goodson Shop Supplies Julio 2013...
- Página 4 .860” a 1.062” en diametro en pistones de 3 1/8” a 4 3/8” en diametro. Use Para asegurar operacion apropriado del PPE-7082, use este equipo con una prensa teniendo la capaci- placas de prensa (que no son incluyidas) para proveer dad de a menos de 5 tonaladas.