Welby 20099 Manual Del Usuario página 8

Safety warning
Although your Ultrasonic Diffuser is easy to operate, for your safety, the warnings
below must be followed:
1. Do not place the diffuser near a heat source.
2. Never leave the diffuser unattended while connected to the electrical outlet.
3. Use the diffuser on a stable surface away from water.
4. Do not unplug the diffuser by pulling on the power supply cord.
5. The diffuser must be unplugged:
A. Before any cleaning or maintenance.
B. Before either filling or emptying.
C. After use.
D. If it appears to be faulty.
Re: ADAPTER
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS
DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY

For connection to a power supply not in the USA, use an attachment plug
adapter of the proper configuration for the power outlet, if needed.
1. Maximum ambient temperature around the Class 2 Power Supply must not
exceed 104°F (40° C).
2. The switching mode power supply is certified according the relevant safety
standards UL 1310.
3. The output power taken from the supply must not exceed the rating given on
the Class 2 Power Supply.
4. The Class 2 Power Supply is not intended to be repaired by service personnel
in case of failure or component defect (unit can be thrown away).
5. The disconnection from line voltage is made by main plug.
8
THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.
SAVE THESE INSTRUCTIONS
FOLLOW THESE INSTRUCTIONS.
Safety instructions