Operation; Functionality Of The Charger; Display Indicators - auto XS EA-2138 Manual Del Usuario

Operation

Functionality of the charger

The charger automatically recognizes the connected battery type, 6 V or
12 V battery.
If the battery terminal clamps
verse polarity), the error indicator
charger overheats or short circuits during operation, the error indicator will
illuminate in red. The charger switches to the standby mode
The charging process only starts when a charging program was selected with
the mode button
If a 6 V battery is connected, only the 6 V charging program
vated with the mode button. Other settings are not possible with this charging
program.
If the charger recognizes a connected 12 V battery, the mode button can be
used to select between the motorcycle
programs.
The selected charging program, the current battery voltage
charge level of the battery are shown during the charging process. As long as
the charging process is active, the frame around the battery symbol will blink
on the display

Display indicators

Indicator
Motorcycle charging
program 7 is shown.
Car charging program
is shown.
Cold charging program
is shown.
6 V charging program
is shown.
The bars for the battery charge
level 11 are partially full and
the frame is blinking.
The bars for the battery charge
level 11 are full and the frame
is displayed continuously.
4
6 .
(see Fig. E).
1
8
9
10
and/or 5 are incorrectly connected (re-
will illuminate in red (see Fig. B). If the
13
7 , car 8
Status
The motorcycle charging program for 12 V
batteries with 1.2 Ah~120 Ah is selected.
The car charging program for 12 V batteries
with 1.2 Ah~120 Ah is selected.
The cold charging program for 12 V batteries
with 1.2 Ah~120 Ah is selected.
The 6 V charging program for 6 V batteries
with 1.2 Ah~14 Ah is selected.
The battery is charging.
The battery is fully charged.
(see Fig. C).
14
10 can be acti-
and cold 9 charging
15 and the
Operation
13