Cleaning And Maintenance - Sencor SWK 40WH-NAB1 Manual Del Usuario

SWK 40WH-NAB1 / SWK 41GR-NAB1 / SWK 42BL-NAB1 / SWK 43OR-NAB1 / SWK 44RD-NAB1
SWK 45VT-NAB1 / SWK 46YL-NAB1 / SWK 47GG-NAB1 / SWK 48RS-NAB1 / SWK 4XXX-NAB1

CLeAnInG AnD MAIntenAnCe

Cleaning the kettle
• Regularly remove the scale deposits from inside the kettle based on how frequently the kettle is
used . If the kettle is used 3 to 5 times per day, we recommend removing the scale deposits:
– once per month in areas with hard to very hard water;
– once every two to three months in areas with soft to medium soft water .
• To remove scale deposits it is possible to use:
– 8% ordinary white vinegar . Pour half a quart (½ Liter) of vinegar into the kettle and let it sit
for 2 hours without boiling .
Then empty the kettle . Fill the kettle with clean water, boil the water and discard it . Repeat this
process four to five times, and the kettle will be ready for use .
– citric acid . Boil half a quart (½ Liter) of water in the kettle, add 1oz (30 grams) of citric acid, and
let it sit for about 30 minutes .
Then empty the kettle . Fill the kettle with clean water, boil the water and discard it . Repeat this
process four to five times, and the kettle will be ready for use .
• To clean the exterior of the kettle, use a dry cloth or a cloth moistened with a weak solution of
neutral kitchen detergent . After applying the kitchen detergent, wipe the surface with a lightly
damp cloth and then wipe dry .
• To clean the power base A4, use only a dry cloth .
• When cleaning the kettle and the power base A4, never use abrasive cleaners, gasoline, solvents,
etc .
2016
Electric Kettle
EN-8
12/2016