ASSEMBLY INSTRUCTIONS
STEP 1
A
x8
B
x8
C
x4
D
x4
F
1. Spread glue in the elongated holes in the Top Support (2). Insert
the Legs (4), with the holes for the barrel nuts facing in, into the
elongated holes. Fasten Legs in place with a Barrel Bolt (A) through
the Top Support into a Barrel Nut (B) in each leg.
Attach the Base (3) to the other end of the Legs in the same way.
Tap Levelers (C+D) into the holes in the bottom of the Base.
85987KFRS 36" Pub Table
D
C
F
A
85987KFRS – Page 3