Actuator Adjustment - Quantum R-net Instrucciones Básicas De Funcionamiento

Actuator Adjustment

The R-net can control optional power accessories such as a power
elevating seat or power elevating leg rests using the mode button and the
joystick.
NOTE: Actuator adjustment may vary depending on the R-net program.
To select and adjust an actuator:
1. Push the on/off button to power on the chair and the controller.
2. Press the mode button to display the actuator screen. See figure 4.
3. Push the joystick to the right to cycle through the available
actuators. The available actuators will be displayed on the LCD
screen or keypad on the controller regardless of whether you are
using the controller or attendant control.
4. When the desired actuator is displayed, give a forward or reverse
command to the joystick to adjust the actuator.
5. Press the mode button until the drive screen appears to return to
drive mode. The drive profile will be displayed momentarily before
the drive screen is displayed.
Tilt
Left ELR/ALR
Recline and ELR/ALR
Figure 4. Actuator Screens
Recline
Right ELR/ALR
15
Elevate
Both ELR/ALR