Nexgrill 720-0830FP Manual Del Usuario página 21

d) Fix sear side burner using 2 screw
removed.
e) Insert (1) 5/32" truss head screw (C) to
attach the sear side burner igniter wire to
the burner bowl. See Fig.21
f) Insert the searing side burner ignition wire to the
ignite module located on the right side panel.
Note: Only need to insert the searing side burner
ignition wire, the other wires have been pre-
assembled. See Fig.22
g) Install the sear burner grease
tray (K) from the rear of the grill.
Push control knob (F) onto valve
control stem
Fig. 21
Fig. 22
21