Dutch originals DO-SV-BTB5-B Manual Del Usario página 14

MODE selection
Press the SOURCE button
OPTICAL button
The selected mode will be shown on the devices LED indicator
• RED: standby mode.
• GREEN: AUX mode.
• ORANGE FLASH: HDMI ARC mode.
• BLUE: BT mode.
• ORANGE: optical mode.
Please note:
If the device source is in BT mode, and the BT connection is no longer active or out
of range, the LED indicator
If the device source is in HDMI ARC mode, and there is no active input signal, the
LED indicator
6
Volume control
• Press the volume + & - buttons
on the device's remote control to adjust the volume.
• If you wish to turn the sound OFF, press the MUTE button
Press the MUTE button
normal volume.
• While adjusting the volume, the LED indicator
flash quickly.
• When the volume level reaches maximum, and you try to increase it further, the
LED indicator 6
• When the volume level reaches its minimum, and you try to decrease it further, the
LED indicator
6
Select a pre-set sound effect
While playing, press the NEWS, MOVIE, MUSIC buttons
control to select the desired pre-set equalisers.
Pre-set modes
• Movie (recommended for viewing movies).
• Music (recommended for listening music).
• NEWS (recommended for listening news / talk).
While selecting a pre-set sound effect, the LED indicator
flashes quickly.
MODE selection (AUX / HDMI ARC / OPTICAL)
Make sure that the device is connected to the TV or audio device.
EN 12
on the device, or the desired AUX – BT - HDMI ARC –
4
on the device's remote control to select the desired input mode.
B
will flash blue.
6
will flash orange.
again or press the VOL+ or VOL- button
D
for the selected source will flash once.
of the selected source will flash once.
on the device, or the VOL+ & VOL- buttons
7
6
:
6
on the remote control.
D
of the selected source mode will
on the device's remote
E
of the selected source
6
C
to resume
C