MAXIMUS Companion Light SPL06-07A1N4-ORB Manual De Instrucciones página 4

5
Use wire nuts to connect black wires
together. Insert both wires all the way into
the nut and twist until secure. Then repeat
for the white wires and for the ground wires.
Wall wire colours may vary. Recommended:
Use of a voltage detector to confirm the
power is off.
7
Mount the light fixture to the long screws
as shown. Then, install both decorative
nuts. Install the light bulb. Apply silicone
sealant between the wall and the light fixture
(optional).
6
Holding light fixture with both hands, align the two fixture
long screws into the light fixture screw posts.
4