Promaker PRO-H1800 Manual Del Usuario página 14

START UP
Park the appliance on an even surface.
Insert the mains plug into the socket.
Water supply
For connection values, see type plate.
ATTENTION
Impurities in the water can damage the high-pressure pump and the
accessories.
Water supply from mains.
Drawing in water from the open reservoirs.
This high-pressure cleaner is suited to work with the YILI suction hose
with backflow vale to draw in surface water, e.g. from water butts or
ponds.
Fill the suction hose with water.
Screw the suction hose into the water connection of the appliance and
insert it into the water source (e.g. rainwater drum).
Bleed the device as follows prior to operation:
• Turn on the appliance "OFF/ON"
• Unlock the lever of the trigger gun.
• Push the lever of the trigger gun, the device will switch on.
• Let the device run (max. 2 minutes) until the water exits the
trigger gun without bubbles.
• Release the lever of the trigger gun.
• Lock the lever of the trigger gun.
OPERATION
ATTENTION
Dry running of more than 2 minutes leads to damage of the high-
14