Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LOCATION OF CONTROLS
1) TS button
2) Record button
3) Repeat/Random button
4) CD skip down
5) Dial scale
button
6) CD skip up
7) MP3 folder up button
8) CD play/pause/stop
9) CD tray open button
10) Band switch
11) Tuning knob
12) Function switch
13) FM stereo LED indicator
14) CD tray
15) Remote sensor
16) USB socket
17) USB indicator
18) SD/MMC card slot
19) SD card indicator
20) Aux in jack
21) 3.5 mm headphone jack
22) Play LED indicator
23) Repeat/Random LED indicator
24) Record LED indicator
25) Off/Volume control knob
26) Power LED indicator
27) FM antenna
28) Line out Audio
29) Auto stop switch
30) AC cord
31) Spindle adaptor
32) Turntable speed selector
33) Pick-up holder
Caution:
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Precautions for use
Installation
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the socket before checking the voltage and before all other connections have been made.
•
Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
1.
Connect the power cord (30) to AC outlet.
2.
Switch on the unit by Off/volume control knob (25). If the power LED indicator (26) light up, it's mean the power supply
is normal. Now your system is ready to play the music.
Listening to radio AM / FM
Manual tuning
1.
Set the tuner mode by function switch (12).
2.
Select the descried band by Band switch (10)
3.
Tune to the required station by turning the tuning knob (11).
4.
Adjust volume knob (25) to the desire volume level.
The FM-stereo LED indicator (13) will light up to show FM stereo program is receiving.
button
button
EN-5
Publicidad
Tabla de contenido
