Publicidad
Idiomas disponibles
Idiomas disponibles
•
ASSEMBLY INSTRUCTIONS FOR SEAT BOTTOMS WITH
FIVE THREADED HOLES ON EACH SIDE
1
Align three slots in Left Armrest (B) with three threaded holes
on bottom of left side of seat. Attach with Screws (C), Lock
Washers (J) and Flat Washers (K). Slide armrest to desired
width and tighten screws securely. Repeat with Right Armrest (G).
Please Note: Fasteners should be checked periodically and
tightened as necessary
Five Threaded Holes - Exploded Assembly View
Five Threaded Holes - Assembled View
ASSEMBLY INSTRUCTIONS FOR SEAT BOTTOMS WITH
ONE THREADED HOLE ON EACH SIDE
1
Remove four screws mounting control mechanism to the seat.
IMPORTANT: Save the screws for later use.
2
Mount Armrest Bracket (A) under control mechanism with
notched side facing front of seat bottom. Large holes in arm-
rest bracket must be positioned over raised portion on sides
of seat bottom. Place large hole of Steel Spacers (F) over
raised portions of seat bottom so spacers are flush with arm-
rest bracket. Attach armrest bracket and steel spacer with
two Screws (H), but do not tighten screws completely.
•
6683-37MP: 2 of 6;
05/04
Adjustable Armrest Kit
G
3
Align four holes in control mechanism with four holes in seat
bottom. If control mechanism has two holes on each side
that line up with two holes in armrest bracket, secure bracket
to control with two Screws (H), Lock Washers (J) and Flat
Washers (K). Secure control to seat bottom using four
screws saved in Step 1. Make sure all screws are securely
tightened, including two for steel spacers.
4
Align three 15mm Spacers (E) with holes next to Steel Spacer
on left side of armrest bracket. Align three slots in Left Armrest
(B) and attach with Screws (D), Lock Washers (J) and Flat
C
Washers (K). Slide armrest to desired width, then tighten
screws securely. Repeat with Right Armrest (G).
J
Please Note: Fasteners should be checked periodically and
tightened as necessary.
K
B
G
One Threaded Hole - Exploded Assembly View
One Threaded Hole - Assembled View
Thank you for purchasing this Safco product. Due to continual
upgrading of our products, photographs or illustrations may
not reflect the actual (exact) appearance of product.
D
J
K
H
F
A
E
Remove and
Save Screws
6683
B
Publicidad
