Publicidad
The 2 CHANNEL FX TIMER is a timer designed to activate (turn on/off ) an eff ect machine
or to alternate two eff ect machines.
encender y apagar un efecto o alternar dos efectos.
TECHNICAL SPECIFICATIONS
Weight
/ Peso:
2.05 Kg.
Dimensions
/ Dimensiones:
Power
/ Alimentación:
Maximum admissible load:
Maximum admissible load for a channel:
load / 15A inductive load
1.
Power Input (powercon)
2.
Link current
/ Link corriente
3.
ON / OFF Switch
4.
Current indicator led
5.
Power indicator led
6.
Thermic Protector
7.
Power Outputs (power Out)
8.
Start - Pause Button
9.
Stop - Reset Button
10. Select Buttons
/ Botones Select
11. Auto run Button
12. Loop Button
/ Botón Loop
SETUP AND OPERATION
1.
Place the 2 CHANNEL FX TIMER on a fl at, stable surface. Connect the power supply cable (not
included) using the POWER IN connector (1). Make sure that the power cable supports the
power of the/s machine/s of FX you want to control.
2.
If you use the device for the fi rst time, turn on the 2 CHANNEL FX TIMER using the On/Off
switch (3) and make sure that the "auto run" function (11) is disabled. If the "auto run" function
/ El 2 CHANNEL FX TIMER es un temporizador para
/ ESPECIFICACIONES TÉCNICAS
13,70 x 17,30 x 10,70 cm.
110-230 V. 50-60 Hz
/ Carga máxima admitida:
/ Entrada de corriente
/ Interruptor de encendido
/ Led indicador de corriente
/ Led indicador de encendido
/ Protector térmico
/ Salidas de corriente (power out)
/ Botón Start - Pause
/ Botón Stop / Reset
/ Botón auto-arranque
/ MONTAJE Y OPERATIVA
20A resistive load / 15A inductive load
/ Carga máxima admitida por canal:
INSTRUCTION MANUAL
2 CHANNEL FX TIMER
20A resistive
Publicidad
