General Notes; Connections To Märklin Digital; Technical Data; Overload Protection - marklin Trix 60061 Manual De Instrucciones

2. General Notes

• The operating instructions are a component part of the
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
• Märklin switched mode power packs may only be used
with products from the brands Märklin and Trix.
3. Connections to Märklin Digital
Use only the switched mode power pack with a plug that fits
into your wall outlet.
Possible plug connections:
Connections: See the instructions for use for the unit in
question or see page 20.

4. Technical Data

See the specifications plate on the power pack.
Example:
Netzgerät Nr. 60061
PRI 230VAC
SEC 19 VDC
STEGER
Nur für trockene Räume

5. Overload Protection

A built-in overload protection protects the switched mode
power pack from damage in the event of an overload or a
short circuit. The switched mode power pack turns itself off
and waits until the problem has been corrected. Do not try
to run any locomotive or control any turnout as long as the
problem is still present.
50-60Hz
60 W
50-06019.05
IP40
7