Designation
Value
Transfer speed
UHCI 60 KBit/
to PC
sec
OHCI 1 MBit/sec
Transfer speed
9,600 to 115,200
to card
baud
Protocols
T=0, T=1, T=14;
SLE4418,
SLE4428,
SLE4432,
SLE4442;
other protocols
available upon
request
Driver
PC/SC, CT-API
Operating
Windows 98/ME
systems
Windows NT/
2000
Linux
Pin assignment
VCC
pin 1
-DATA
pin 2
+DATA
pin 3
Ground
pin 4
Shielding
shell
3 Connecting the smartcard
reader to the PC
3.1 Windows NT 4.0
How to connect the smartcard
reader to your PC under Windows
NT
• Connect the USB connector of the
smartcard reader to the USB port
of your PC.
3.2 Windows 98/ME/2000
How to connect the smartcard
reader to your PC under Windows
98/ME/2000
1 Connect the USB connector of the
smartcard reader to the USB port
of your PC.
The message New hardware
component found is displayed
on the screen. The dialog box
Required Files then appears,
informing you of the files which
are needed.
2 Install the software as described
in How to install the software
under Windows 98/ME/2000.
7