Easy Home IN11B Hoja De Instrucciones

decoy camera
instruction sheet
Please keep these instructions in a safe place for future reference
Contents:
1 x dome shaped decoy camera
2 x mounting screws
2 x plastic wall anchors
2 x AA batteries
Battery installation:
1. Open the battery compartment cover
2. Insert 2 AA batteries (included) following
the polarity indicators
3. Replace battery compartment cover.
4. The red LED light will begin to blink to indicate
the unit is working.
Installation:
1. Locate the area you want to install the decoy camera
ensuring the location is in a sheltered area away from
extreme weather, heat or moisture. Do not expose to rain.
2. Secure in place using the mounting screws provided.
3. If installing on a stone or brick surface use the plastic
wall anchors provided
Notes:
• Please note that this decoy camera has been designed to
act as a deterrent and does not record any images or
sounds. Install this unit in a noticeable area so it is visible
to people passing by, giving the impression the area is
monitored by a security camera.
• If the red LED light stops blinking it is time to change the
batteries.
Caution:
• Batteries may leak harmful liquids or ignitable
materials or explode causing injury and product
damage.
• Do not mix old and new batteries or other battery types
• Replace all batteries of the same kind at the same time
• Replace fully discharged batteries immediately
Note:
This product is designed to be a deterrent. It is an alarm signal. It does not guarantee protection.
Made in China
DIST. & SOLD EXCLUSIVELY BY:
ALDI
BATAVIA, IL 60510
MODEL / MODELO: IN11B · 09/2020 ·
REMOVE
BATTERY
COVER
BATTERY
COVER
2 AA BATTERIES
(Included)
2x
INCLUDED
802249