GXT 288 Steering Wheel – USER'S MANUAL
- USER'S MANUAL
Button Relocation
The Shift +, Shift -, L-Pedal, R-Pedal, L3 and R3 can be programmed to Δ, O, X, , L1, R1, L2, R2.
-Press and hold 'start' and 'select' for 3 seconds till the LED illuminates.
-Press the button that you wish to relocate. The LED starts to flash.
-Press the new button function. The LED turns OFF. The relocation is complete.
-Repeat the above steps to relocate further control buttons.
Once power off, all the program settings will be saved.
Make sure that the button relocations are deleted before changing to a different driving game, otherwise the
controls may not match the new game being played.
Clear Button Relocation
-Press and hold 'start' and 'select' for 3 seconds till the LED illuminates.
-Press the desired button to delete the button relocation, the LED starts to flash.
-Re-press the button, the LED is off, deletion is complete.
-Repeat the above steps to clear any other button relocations.
Restore factory defaults
-Press and hold 'start' and 'select' for 3 seconds till the LED illuminates.
-Press and hold the 'start' key till the LED starts to flash.
-All button functions have been restores to the factory defaults.
4