Assembly - Bohmer-AG K Serie Manual De Operación

K Series

Assembly

The axle mounts
are located on the
left underside of the
generator.
The front feet are fitted to the pre-drilled holes
on the subframe.
The 5000K-E and
7000K-E have
additional foot mounts
which must be fitted
between the feet and
the frame.
8
Slot the two axles through the mount and
secure with the nut.
The handles are fitted
to the right side of the
machine next to the
fuel tank.
© Böhmer-AG
English
Fit the front rubber feet to the subframe and
secure with the nut.
Locate the holes and
secure the handles
with the nuts and long
bolts.
Secure the wheel with
the split pin.
The battery is
connected black to
'-' negative, red to '+'
positive. Secure with
nut and bolt then shield
with terminal covers.