Software Installation - Belkin Optical Ergo Manual Del Usuario

1
2
3
3
4
5
P74816ea_F8E857ea.indb 8

Software Installation

Important:
Do not install the software until the
Mouse is connected and properly functioning to your
computer. If you have not yet connected the Mouse,
please follow the Hardware Installation instructions.
1.
Insert the included installation CD into your
CD-ROM drive. After a few moments, the
main menu will start automatically.
2.
Select "Install Driver" and the
computer will begin installation.
3.
Follow the on-screen instructions
to complete the installation.
Note:
If the computer does not automatically
detect the CD, do the following:
1.
Click the "Start" button and select "Run".
2.
From the run dialog box, enter "<driver>:\
Setup" and click "OK". ("<driver>" being the
letter of the drive that identifies your CD-ROM
driver under "My Computer". For example, if
the CD is in driver D, enter "D:\Setup".)
3.
Follow the on-screen installation instructions.
8
15/6/05 5:56:41 pm