golmar VESTA GB2 Guía Rápida página 3

VESTA7 G 2 MONITOR B
( )
*
Monitor description upon receiving a call and during communication.
( )
*
Answering a call from the door panel.
When a call is received, the monitor(s) will play a melody and show the door panel image on the main
monitor without alerting the visitor. To answer the call, press push button
Communication will last for 90 seconds or until push button
To open the door 1 or 2, press the push button
one press will activate the lock release for 5 seconds.
00:30
Start/stop communication.
To open the door 1, press the door release push button during the communication or call
processes: one press will activate the lock release for 5 seconds.
To open the door 2, press the door release push button during the communication or call
processes: one press will activate the lock release for 5 seconds.
( ) For more information, see the TVESTA7 GB2 user manual (code
* "
https://doc.golmar.es/search/manual/50121960
00:30 Elapsed call/communication time.
Door panel that made the call/CCTV
01
camera selected.
In call.
In communication.
In call/communication LEDs illuminated.
Screen settings: brightness, colour,
contrast and monitor volume.
Select CCTV camera image(s)
(DQ-CAM-GB2 module required).
End call/communication.
Activate door release 2.
Activate door release 1.
Start/stop communication.
Call: LED blinks rapidly.
Communication: LED blinks slowly.
.
is pressed again.
/ during the communication or call processes:
With the monitor in communication or
auto switch-on, press push button
01
access the settings menu: brightness,
colour, contrast and monitor volume.
50121960)".
4
VESTA G 2 M
Camera/Door
to
Golmar se reserva el derecho a cualquier modificación sin previo aviso.
Golmar se réserve le droit de toute modification sans préavis .
Golmar reserves the right to make any modifications without prior notice.
Code Web
golmar@golmar.es
7 B ONITOR
Light Intercom About
QUICK GUIDE
50121 960 TVESTA G 2 E 7 B
www.golmar.es
Sistemas de comunicación S.A.
Setup
N GR REV.0 1 2 7