Auta neos Manual Del Usuario página 5

neos
Functioning_EN
calling and conversation
When a call is received from the entrance panel, the phone starts ringing for a maximum of 30 seconds. As standard,
it performs 4 rings with intervals of 4 seconds between each of them.
During the call period, the user can open directly by pressing the button
conversation. The conversation has a maximum of 90 seconds. If you want to continue with the conversation, press the
button
A
self-starting
In standby, picking up the handset and by pressing the button
PANEL. In the case of more than one panel is present in the installation the system will do the self-starting to the last
one from which it receives a call.
Once the communication is established, an opening can be made by pressing the button
calling to concierge
In standby, if the handset is picked up and the button
system does not have a concierge unit installed, the phone will emit an error beep.
adjust of the calling volume and melodies
In standby, press
A
There is 4 call melodies and 2 volume levels for each one (MEDIUM and HIGH)
ding dong function
The phone allows to replace the interior bell of the house, this integrates the two calls (outside panel and house bell)
in a single device. These calls will be differentiated with different melodies and flashes automatically. In order to have
this function, you only have to connect the button of the house bell to the phone.
external functions
The phone has 1 push-button
The "auxiliary" mode will be active during a calling from an external panel or a conversation.
An Auta auxiliary relay must be connected to the control circuit we want to control.
. With each press will select a different melody and a different calling volume.
A that allow auxiliary functions, such as garage doors, lights, irrigation, etc ...
, or pick up the handset to establish a
the user can establish communication with the
A
is pressed, a call will be made to the concierge unit. If the
Bringing people together