Joovy Room2 701X Manual Del Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
FR ES
• Gather the playard together until it is compact and completely folded. See Figure 4.5.
NOTE: DO NOT force the playard. If the unit will not fold, look for a partially latched top rail and push the button in to release the rail.
• Lay the mattress on the floor with the soft side facing up. Lay the folded playard frame on the mattress and fold the mattress around it.
See Figure 4.6.
• Locate the Velcro® straps on the end of the mattress, thread them through the plastic rings on the other side of the mattress and attach
them. See Figure 4.7. Then stand the playard upright.
NOTE: There are three straps; one near the top, one near the center and one near the bottom.
• Open the zipper on the travel bag and slide it over the folded playard. See Figure 4.8. Once the playard is completely inside the travel
bag, close the zipper.
Maintenance
All of the fittings, locks, rivets, and other hardware and plastic parts on the playard should be inspected periodically to insure that they are
secured properly and not damaged or malfunctioning. The straps and fabric items and their stitching should also be inspected periodically to
ensure that they are secured properly and not loose, torn or otherwise damaged. All moving parts, such as wheels, and hinges should also
be checked periodically to ensure they are operating properly.
If using this item at the beach you must clean sand off of ALL the parts before packing it into the travel bag. Getting sand in the top rail
locking mechanisms may damage these mechanisms.
Any missing, broken, or worn components should be replaced immediately, and the playard should not be used until they are replaced. Only
original manufacturer's components should be used. If needed, please contact Joovy (USA) or ISSI Inc. (Canada) at our toll-free phone
number.
Cleaning
The fabric material on this playard can be cleaned using mild household soap or detergent and warm water on a sponge or clean cloth.
Always allow the fabric to completely air dry before using the playard.
The frame should always be kept clean and free of dirt and foreign matter. Use a sponge or cloth dampened with warm water and a mild
household soap or detergent to clean the wheels after such use.
See the care label sewn onto the sheet for detailed cleaning instructions.
We want you to be completely satisfied with your purchase of this product. Should you experience any difficulty in
assembling or using this product, or if you have any questions, please contact our Customer Service Department:
UNITED STATES - Joovy: (877) 456-5049, Hours 8:30 am – 5:00 pm Central Time.
SATISFACTION GUARANTEED
CANADA - ISSI Inc.: (800) 667-4111, Hours 8:30 am – 5:00 pm Eastern Time.
Please log onto www.joovy.com to register your new Joovy product.

Publicidad

Tabla de contenido
loading

Productos relacionados para Joovy Room2 701X

Tabla de contenido