Atlantis A18-IRS06 Manual Del Usuario página 2

Smart Wi-Fi IR Remote Controller can be placed on a flat surface or fixed to the wall / ceiling using
the adhesive provided. The device integrates various IR LEDs and can therefore easily control all
the IR receivers in a room as long as there is direct visibility. For the power supply you can use a
common smartphone power supply with USB port.
After the start-up phase, the blue LED will start flashing twice a second after about ten seconds.
The device is ready to be configured.
Installing Tuya App on Apple/Android devices
 Download and install the Tuya application from the App Store or PlayStore on your
iPhone/iPad/Android. Touch the App Store/PlayStore icon, then Search for Tuya Smart. The
application is free.
 On your smartphone, tap the Settings icon, then Wi-Fi. Your smartphone will show you the
network that you are currently connected to, which is the same that the device will connect to.
 Launch the Tuya app.
 At the first start-up You need to create a new account (if this step has already been done, go
immediately to the section where the controlled outlet is added). Tap on Register and accept
the Privacy Policy, tapping on Agree.
 The system will identify automatically the country/region you are in, or you may choose to select
manually a country/region. Enter your email (mobile phone number) and tap Obtain
Verification Code.
 Enter the authentication code you received. Then enter the password and tap Completed to
complete registration.
 The Tuya app will display now the Home Page.
 Now we will add manualy a new device.
 Tap My Home[
 (Android) Tap Others->Universal Remote Controller. Please make sure the LED is flashing
rapidly (at a rate of twice a second) and then click the button to proceed to the next step. If this
is not the case, follow these steps: Power on device, push reset for 6 seconds. The blue led is
now rapidly flashing (at a rate of twice a second).
 Tuya app will show you the network that you are currently connected to, which is the same that
the Smart Wi-Fi Door/Window Sensor will connect to. Tap Change Network in order to select
another wireless network.
 Enter, if not already present, the wireless network access password
 Tap Next. The app wil try to connect your device.
 Tap Fast Flashing.
 Tap [ ] in order to change the device's name and room. A simple name will make voice control
easier with Alexa / Google Home. Tap Completed.
 LED Blue flashing (at a rate of twice a second): lamp ready to be
configured.
 LED Blue flashing (once every 2 seconds): lamp ready to be configured
in AP mode.
 Steady blue LED: problems accessing the configured wireless network.
], then +[ ].
2
ENG