Audio Recording - Wiseup CK6000 Guia Del Usuario

vibrate once. The red indicator light will go out and the blue one will stay illuminated.
3.3.3. Press Power On/Off Button once to take a photo. The camera will vibrate
once. The blue indicator light will flash once and then stay illuminated, indicating the
camera is back to photograph mode.
3.3.4. Press Mode Button again to switch the modes, or press Power On/Off Button
for 2 seconds to exit the photograph mode and the camera will shut down.

3.4. AUDIO RECORDING

3.4.1. Power on the camera by pressing Power On/Off Button for 2 seconds. The
camera will vibrate once. The blue and red indicator lights will illuminate for 3 sec-
onds. Then the blue indicator light will go out and the red one will stay illuminated.
3.4.2. Press Mode Button twice in a row to enter into audio mode, the red and blue
indicator lights will stay illuminated. Each press will come with a vibration.
3.4.3. Press Power On/Off Button once to record audio. The camera will vibrate once.
The red indicator light will keep flashing slowly and the blue one will stay illuminated.
3.4.4. Press Power On/Off Button once again to stop recording audio. The camera
will vibrate once. The red and blue indicator lights will be stay illuminated, indicating
the camera is back to audio mode.
3.4.5. Press Mode Button again to switch the modes, or press Power On/Off Button
for 2 seconds to exit the photograph mode and the camera will shut down.
[Note]:
1). An audio file will be generated and saved every 20 minutes automatically.
2). Audio Format: WAV
3.5. MOTION DETECTION RECORDING
3.5.1. Power on the camera by pressing Power On/Off Button for 2 seconds. The
camera will vibrate once. The blue and red indicator lights will illuminate for 3
seconds. Then the blue indicator light will go out and the red one will stay illumi-
nated.
3.5.2. Press Mode Button 3 times in a row to enter into motion detection mode.
Each press will come with a vibration.
3.5.3. The camera will record video automatically when a movement is detected. The
red and the blue indicator lights will flash alternately.
3.5.4. Press Mode Button to exit motion detection mode. The camera will vibrate
once. The red indicator light will stay illuminated, indicating the camera is back to
standby mode.