Freeman P6OPK Manual De Instrucciones página 2

MODEL: P6OPK
SYMBOLS
GENERAL SAFETY INSTRUCTIONS
POWER HANDLE SAFETY WARNINGS
ELECTRICAL
FEATURES
OPERATION
SPECIFICATIONS
AUXILIARY HANDLE
STARTING / STOPPING THE TOOL
VARIABLE SPEED
INSTALLING / REMOVING POLISHER PADS
USING THE POLISHER
MAINTENANCE
WARRANTIES
WARNING
The warning and precautions discussed in this manual cannot cover all possible conditions and
situations that may occur. Please be aware of the potential hazards and take all necessary
precautions to avoid risk of injuries.
SAVE THIS MANUAL
Keep this manual for the safety warnings,
precautions, operations, inspections, and
maintenance information. Store this manual
and the receipt in a safe and dry place for
future reference.
02
HTTP://WWW.FREEMANTOOLS.COM
3
3 - 4
4 - 5
5 - 6
6
6 - 7
6
6
7
7
7
7
7
8
WARNING:
To avoid serious personal injury, do not
attempt to use this product until you read
the manual thoroughly and understand it
completely. Save this manual and review
it frequently for safe operation and
instructing others who may use this tool.
1-888-669-5672
MODEL: P6OPK
SYMBOLS
In this manual, on the labels, packages and all other information provided with this tool, the
following signal words and meanings are intended to explain the levels of risk associated with this
tool.
SYMBOLS
SIGNAL MEANING
Indicates a potentially hazardous situation, which, if not avoided,
WARNING:
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
CAUTION:
may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result in
CAUTION:
property damage.
GENERAL SAFETY
INSTRUCTIONS
CALIFORNIA PROPOSITION 65
WARNING:
This product can expose you to
chemicals including lead, which is known
to the State of California to cause cancer
and other birth defects or otherreproduc-
tive harm. For more information go to
www.P65Warnings.ca.gov.
WORK AREA SAFETY
•
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
•
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
•
Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
•
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed (ground-
ed) power tools. Unmodified plugs and
matching outlets will reduce risk of electric
shock.
•
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
HTTP://WWW.FREEMANTOOLS.COM
•
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
•
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
•
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
•
If operating a power tool in a damp
location is unavoidable, use a ground fault
circuit interrupter (GFCI) protected supply.
Use of a GFCI reduces the risk of electric
shock.
PERSONAL SAFETY
•
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of drugs,
alcohol or medication. A moment of inatten-
tion while operating power tools may result in
serious personal injury.
•
Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
1-888-669-5672
03