EN
9. Keep connections dry.
10. If the power supply cord is damaged avoid to use it. Let the Manu-
facturer, or the After Sale Service, or some similar qualified person
replace it, in order to avoid any risk.
11. Disconnect the appliance from the supply line, if you don't use it for
a long time.
12. Always unplug the appliance before doing any maintenance opera-
tion.
13. Periodically verify the integrity of the appliance. If defects are found,
do not use it; call an Authorized After Sale Service.
14. In case of malfunction or fault, call an Authorized After Sale Service,
and request original spare parts.
In case of steady connection to the wire, a bipolar circuit breaker
with contact opening distance of at least 3 mm must be fitted
upstream from the supply line.
This hairdryer must be installed out of the range of a person using
the bath or the shower.
Disconnect the appliance from the power supply when not used.
For safety reasons, never attach the device above bath tubs, wash
basins, showers, or other fittings where there may be water.
FITTING INSTRUCTIONS
• Installation must be carried out by a technical, qualified staff, following
the instructions supplied by the manufacturer. Safety may be compro-
mised by the not observing the installation directions.
• The hair dryers have been specifically designed for vertical attachment
on the wall with the air outlet toward the bottom.
• Make sure that the wall where you plan to mount the appliance is solid
and free of electrical cables or water pipes inside.
USE AND MAINTENANCE
8