Turning Off - Kyocera TASKalfa 4820w Manual Del Usuario

4. When Ready Indicator stops flashing, this machine is ready for operation.
NOTE
It is impossible to make any prints while Ready Indicator is
flashing in orange. Please wait until it turns in green.

Turning off

1. There is a Power Switch on the right side of TASKalfa 4820w.
Press its " " side to turn off the machine.
CAUTION
This machine print engine and UI appear to be shut down when you turn off the machine.
However, the controller PC embedded inside this machine is still operating and will
shutdown in approximately two minutes after Power Switch operation.
Do not unplug this Machine before the controller PC completes its shutdown. Doing so may
damage data or the device.
Power Switch
2
English
Press " " side.