Troubleshooting - Master BC 121 Manual De Instrucciones Para El Uso Y Mantenimiento

►►7. TROUBLESHOOTING
FAULT
The display does not 1. No power supply
work
2. Defective equipment
There is no air flow or 1. Rear side air vent clogged
it is very low
2. Defective equipment
The cooler does not 1. Defective equipment
respond to the com-
mands
The cooler leaks 1. The drainage plug is loose
water 2. The drain is dirty and the drainage
3. The tank leaks
4. The panel is dripping
CAUSE
plug does not fully close
SOLUTION
1a. Make sure that the cooler is connected to
the power supply
1b. Contact a support centre
2. Contact a support centre
1a. Keep the rear part of the cooler away from
walls that may obstruct the airflow
1b. Remove any objects from the air vent
1c. Contact a support centre
2. Contact a support centre
1. Contact a support centre
1. Close the plug
2. Clean the drain and close the plug
3. Contact a support centre
4. Contact a support centre
en