Fitin Juice SJW-ACNB Instrucciones De Uso página 22

ENGLISH
3) Insert the rotating squeegee (4) into the extraction bowl (5)
making sure that the gear wheel in the extraction bowl drives
the teeth of the squeegee.
4) Then assemble the filter (3) to the extraction bowl making
sure the pulp outlet hole under the filter (14) is located above
the hole of the extraction bowl and that the lug (13) located
opposite fits into the notch in the extraction bowl, as shown in
the first diagram below. You may get help aligning the arrow
on the edge of the filter with the arrow on the edge of the
extraction bowl as shown in the second diagram below.
5) Then insert the squeezing screw (2) into the hole sitting in the
middle of the extraction bowl and ensure that it is well
positioned by turning it until it locks into the hexagonal motor
shaft (11) on the body of the extractor (6).
6) Assemble the safety hood (1) on top of the extraction bowl by
aligning the respective arrows and rotating clockwise the
hood. The locking tab (16) should trigger the safety switch (17)
located in front upper part of the body.
FitinJuice ©
ENGLISH
Locking tab
(16)
8