Polk melee Manual Del Usuario página 3

Xbox 360 Setup
®
Connect the digital optical cable (included) from the digital output on your Xbox 360
to the digital input on the DSP Amp. (note: Remove the protective caps from each
end of the optical cable before inserting them into the sockets.)
Connect the DSP Amp USB power cable to your Xbox ® 360 Console.
Connect the Audio Cable from the Audio Mixer to the DSP amplifier input
(round plug where DSP LED is located).
Plug the Audio Mixer into the Xbox ® 360 controller.
Insert the 3.5 mm connector into the Melee headset.
Use the Voice and Game Volume Control Knobs on the Audio
Mixer to adjust the overall volume level of headset output.