Denon Professional Envoi 2 Guia Del Usuario página 4

Features
Front Panel
Display: Shows
1.
wireless mic channel.
Up/Down: Use these buttons to
2.
select the wireless mic channel
that gives a strong signal.
RF/AF LEDs:
3.
illuminates when a wireless mic
frequency has been matched to
your transmitter. The AF LED
illuminates when an audio signal
is being received.
Mute Level: If the AF or RF LEDs flicker or stay on when the wireless
4.
microphone is off, turn the Mute Level screw counter-clockwise until the
LEDs are off. When the Mute Level is properly adjusted, the
corresponding AF and RF LEDs will light up only when the wireless
microphone is being used.
ASC (Auto-Sync Channel): If you receive interference or if another
5.
channel is needed, select another channel by pressing this button.
IR LED: This will illuminate when the ASC button is pressed and the
6.
receiver pairs to your wireless mic.
Power-Vol: Turn this knob clockwise to power on Envoi Receiver 2 and
7.
adjust the volume for the wireless microphone signal.
4
the selected
The RF LED
3
1
2
5
6
4
7