Electrical Power Supply - SOMFY QuickCopy Guia De Instalacion

EN
3. COMMISSIONING THE QUICKCOPY TOOL

3. 1. ELECTRICAL POWER SUPPLY

Inserting the batteries: unscrew the 4 screws
and open the appliance. Insert the two
batteries supplied into the QuickCopy tool
(make sure the +/- polarity is correct!), then
retighten the screws.
3. 2. USING THE QUICKCOPY TOOL
Attach the electronic module to the QuickCopy tool. On the electronic module,
the copy functions are displayed:
• "Device -> QuickCopy" :
The appliance's parameters can be
copied to one of 10 storage locations.
• "QuickCopy -> Device" :
The data from one of the 10 storage
locations can be copied in the product.
"Configure"
•
The QuickCopy copy tool functions only
as a power supply module. Modifications
are possible as in normal mode.
Smoove UNO io does not have a display screen. In this instance, a single
storage location is available in the QuickCopy tool.
For more information, refer to QuickCopy's detailed manual.
The images are not contractually binding
20
:
Copyright © 2017 Somfy SAS. All rights reserved.