Auxiliary Input - QFX TURN-101 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Select the Bluetooth pairing name, to connect the unit. Once connected, the blue LED
light will stop flashing.
5. You are now connected to your external device via Bluetooth.
6. Rotate the VOLUME CONTROL KNOB to adjust the sound level.
Connecting external audio devices like MP3 players, CD players and older, non-dock able
iPods (except iPod shuffle 3
speakers of this system.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the
cable.
2. Plug one end into the LINE IN JACK (#6) and the other end of the cable into the
Line-out Jack or Headphone Jack of your external audio device.
3. Rotate the POWER/VOLUME knob clockwise until you hear a "click" sound to turn the
device on.
4. Rotate the FUNCTION SELECTOR (#8) to select to the LINE IN position. The Power
and Function LED „Purple‟ light indicator will light up.
5. The volume level can now be controlled through the main unit. Operate all other
functions on the auxiliary device as usual.
Note:
(1). If the Line-Out Jack of your external device is connected, then you only need to adjust
the volume control of this system. If the Headphone Jack of your external device is
connected, then you may need to adjust both the volume control of your external
device and the volume control of this system to find the most desirable volume setting.
(2). Slide the POWER ON/OFF SWITCH (#12) to turn off the system when you finish
listening. Don't forget to switch off the power on your external device as well.
You can connect this unit to an external Hi-Fi / AMPLIFIER system by connecting the
RCA LINE OUT JACKS (#18) to the auxiliary input jacks on your Hi-Fi / AMPLIFIER
system with RCA cables (not included).
CONNECTING TO A COMPUTER FOR RECORDING
Before getting start, please install the "AUDACITY" recording software to your computer.
Below is an example using a computer with Microsoft XP and the Audacity software
installed. For other Windows OS or Mac OS, please visit Audacity website for details.
http://audacity.sourceforge.net/
INSTALLING THE AUDACITY SOFTWARE
1.
Insert the Audacity disc (included) into the CD drive of your computer.
2.
Click on My computer on the desktop.
Double click CD drive to view the contents of the CD and select "Windows" under
3.
"Audacity" folder.

AUXILIARY INPUT

rd
gen) so you can listen to your external source through the
LINE OUT CONNECTION
7

Publicidad

Tabla de contenido
loading

Tabla de contenido