Before Using Your Electric Wine Opener; Operating Instructions; Connection And Use; Recharging Your Electric Wine Opener - iTronics IR700WR Manual De Usario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Warning:
Please do not use this device to uncork bottles when charging
as this can damage the device.
EN
6. Foil Cutter: Place the foil cutter on top of a bottle of wine and press inward and
twist to cut and remove the wine bottle seal.
7. Charger: Input: 100-240V AC, output: 5V 0.5A DC

BEFORE USING YOUR ELECTRIC WINE OPENER

For your convenience, record the model number and the date you purchased
the product. Keep your purchase receipt together with the warranty information
in the event that warranty service is required. Retain this manual for future
reference.

OPERATING INSTRUCTIONS

CONNECTION AND USE

We recommend that you charge your electric wine opener for At least 3-5
hours before using it for the first time. Please follow Instructions for
recharging below.

RECHARGING YOUR ELECTRIC WINE OPENER

Plug one end of the adapter cord into the base of the charging unit and the
other end into the main socket. Place the electric wine opener into the
recharging unit while making sure that it is firmly in position and that it is
fully engaged with the recharging connections. It will take up to 3-5 hours to
recharge your electric Wine opener. After charging disconnect the electric
wine opener from the wall outlet and store the charging unit for future use.
When your electric wine opener is fully charged, it can be used to open up to
180 bottles.
-15-

OPERATING YOUR ELECTRIC WINE OPENER

The electric wine opener is operated by a single up/down
button. The button has two functions. With the iTronics
Electric Wine Opener securely placed on top of an
unopened
wine bottle, press the lower part of
(down button) to remove the cork from the bottle. Pressing
the upper part of the button will release the cork from the
iTronics
Electric Wine Opener
after you have removed it
from the bottle.
1) To remove the foil cutter please follow this procedure:
Just take off the base, the foil cutter is in the bottom of it.
2) Place the foil cutter on top of a bottle of wine and press inward and twist
to cut and remove the wine bottle seal.
UP
the button
DOWN
-16-
EN

Publicidad

Tabla de contenido
loading

Productos relacionados para iTronics IR700WR

Tabla de contenido