ENERGY SISTEM Soundbar SB5 Bluetooth Manual Del Usuario página 30

To turn on the soundbar you have to press on the front panel of the soundbar the button (1) or use the
remote control and press (1). To turn on the subwoofer you just have use the switch on the back side.
To pair the two units you have to turn on the two units at the same time, you can see on the display (3)
a scanning to reach the level of 20, it will stop and emit a small sound indicating that the pairing was
successful.
It is very important to know that the distance between the soundbar and the subwoofer can not be more
than 10m.
RCA input
Use the audio RCA cable and connect one side to the input of the soundbar (5) and the other side to your
device (DVD, TDT, TV, etc.)
To select this function, press the button (2) on the front panel of the soundbar or use the remote control
and press (2), you will see in the display (3) "Au".
Coaxial input
Use the coaxial cable and connect it to the coaxial input of the soundbar (6) and to your audio player
such as DVD, Blue-ray, game console, media center, etc.
To select this function, press the button (2) on the front panel of the soundbar or use the remote control
and press (2), you will see in the display (3) "Co".
30