Configuration - nedis AHDS204CWT4 Manual Del Usuario

Brightness
Contrast
Image Color
Chroma
Saturation
AHD
TVI
Video Mode Settings
AUTO
CVI
Electronic Zoom
Click and drag in bottom right image to zoom in
PTZ control
not applicable with our cameras
Select date and camera, search for made recordings in bottom timeline
Play / Pause
Stop
Fast Forward / Rewind
Slow / Fast
Screen splitting mode
Video Query
Backup
Capture
Full Screen
Electronic zoom
Exit Playback
Backup
Record

Configuration

Main Menu
System Setting
Play / Pause current video
Stop the video, all screens close
Video Fast Forward / Rewind
Play the video at the speed of 1X/2X/4X/8X/16X
Watch 4 cameras simultaneously
Backup recordings on USB hard disk
Save still frame of the selected channel
Single-click to enter full screen
Use the thumbnail on the bottom right corner to select an area to zoom in to
Return to preview page
Channel
Stream type
Video quality
Basic / Manual /
Event
Resolution
Bit rate limit
Frame rate
Channel
Select the desired type of recording (No, Common or Motion)
Schedule
Click and drag to set the schedule for the entire week
Copy the selected schedule to other cameras if needed.
Menu Output
Output Mode
Output Config
4
default = ch. 1, select which channel to set.
video = video only, composite = video and audio
set quality (higher quality = larger files)
automatically defined by the camera
choose preset value or set manually
choose any value, default is "full frame rate";
Select the camera for which to set the recording schedule
Camera Name Shown on each channel display
Define up to 4 areas which are blocked in
Camera Mosaic
recording (security/privacy)
Set the required action when signal loss is
Video Loss
detected
Set sensitivity
Set the required action(s) when motiomn is
detected: recording one or more channels,
Motion detection
showing fullscreen
Area setting (motion mask): only movement in
the highlighted areas triggers recording
Set brightness, contrast, chroma and saturation
Color Settings
for each channel individually
Menu Transparency Set the transparency of menu item background
Set the time after which the screen automatically
Screen Saver Time
switches off
Resolution
Set the resolution sent over VGA and HDMI output