Features; Specifications; Receiving - KNOVA KN CM-20W3 Manual Del Usuario

FEATURES

Magnetic swich
Cast iron
extension table
Lifting
handles
Built-in mobile

SPECIFICATIONS

20" x 8" WOOD PLANER 3 H.P. / KN CM-20W3
Motor:
Maximum cutting width:
Maximum cutting thickness:
Maximum cutting depth:
Minimum cutting thickness:
Minimum planing length:
Number of knives:
Cutterhead speed:
Cuts per minute:
Cutterhead diameter:
Feed rate:
Dust chute diameter:
Overall Dimensions
(W x D x H/in.):
Net/gross weight:

RECEIVING

Carefully unpack the planer and any loose items from the
wood crate and inspect for damage. Any damage should be
reported immediately to your distributor and shipping agent.
Before proceeding further, read your manual thoroughly to
familiarize yourself with proper assembly, maintenance and
safety procedures.
Remove the screws that hold the planer to the shipping skid.
Remove the protective coating from the table, bed rolls, feed
Retum rollers
base
3 H.P. 230 V. 60 Hz.
single-phase
20" (508 mm.)
8" (203 mm.)
1/8" (3.2 mm.)
3/16" (4.76 mm.)
7-1/2" (191 mm.)
4 (20" x 1" x 1/8")
5,000 R.P.M.
20,000
3-1/16" (78 mm.)
16 and 20 F.P.M.
5" (127 mm.)
39-1/2 x 56-1/2 x 45"
(1,003 x 1,435 x 1,143 mm.)
342 / 372 Kgs.
Figure 2
20" x 8" WOOD PLANER 5 H.P. / KN CM-20W5
Motor:
Maximum cutting width:
Maximum cutting thickness:
Maximum cutting depth:
Minimum cutting thickness:
Minimum planing length:
Number of knives:
Cutterhead speed:
Cuts per minute:
Cutterhead diameter:
Feed rate:
Dust chute diameter:
Overall Dimensions
(W x D x H/in.):
Net/gross weight:
rolls, cutterhead and loose items packed with the machine,
including lifting handles and motor pulley. This coating may
be removed with a soft cloth moistened with Kerosene. Do
not use acetone, gasoline or lacquer thinner for this purpose.
Do not use solvents on plastic parts.
CAUTION
Use care when cleaning the cutterhead,
the knives are very sharp.
2
5" Dust port
Table raising and
lowering handle
Feed rate
shift handle
Oil bath
gearbox
5 H.P. 230 / 460 V. 60 Hz.
3 phases
20" (508 mm.)
8" (203 mm.)
1/8" (3.2 mm.)
3/16" (4.76 mm.)
7-1/2" (191 mm.)
4 (20" x 1" x 1/8")
5,000 R.P.M.
20,000
3-1/16" (78 mm.)
16 and 20 F.P.M.
5" (127 mm.)
39-1/2 x 56-1/2 x 45"
(1,003 x 1,435 x 1,143 mm.)
342 / 372 Kgs.