EN
Legend of symbols
This symbol shows parts which
must be read with care.
⚠ This symbol means the parts which
describe safety issues.
Intended use
STRAUSS is a weather station with
sensors, its signals are read by a Chopin
hard-wired weather control unit, designed
to automatically manage any moving
elements like boxed awnings, rolling
shutters, drapes and rolling blinds) in
relation to weather conditions.
VERSIONS
STRAUSS W: weather station with Wind
sensor (item code 001YE0007).
STRAUSS SW: weather station with Sun-
Wind sensor (item code 001YE0008).
Any installation and use other than that
specifi ed in this manual is forbidden.
TECHNICAL DATA
STRAUSS
Protection rating IP44
Working temperature -20°C / +55°C
Dimensions 131 x 269 x 164 mm
Weight 350 gr
119T70521 - ver. 1.0
119T70521
1.0 - 01/2012
STRAUSS - WIND SENSOR
Sensitivity 1 km/h
Detection range / fi eld 5/40 km/h
ST R A U S S - S U N S E N S O R
Sensitivity 1 Klux
Detection range / fi eld 15/60 Klux
CABLE TYPE AND SECTION
Connection for Wind and sun-wind sensors
Cable type FR0R CEI 20-22 NPI
EN 50267-2-1
Wind Sensor 1
Cable length
< 20 m 3G x 0.5 mm
2
Cable length
3G x 0.5 mm
2
>20 m
twisted
SENSOR WIND SUN 2
Cable length
2
4G x 0.5 mm
< 20 m
2
Cable length
4G x 0.5 mm
>20 m
twisted
DIMENSIONS
MAIN COMPONENT PARTS
1. Sun-sensor terminals
2. Wind-sensor terminals
3. Anemometer
4. Sun sensor
Installation
⚠ Installation must be carried by
skilled, qualified technicians in
accordance with current regulations.
PRELIMINARY CHECKS
Make sure the weather station is fastened
to an impact-protected area, yet in
relation to the chosen model, that it is
exposed to air-fl ow and sun-light.
Fasten to solid, fl at planes using proper
bolts, nuts and washers.
Set up proper conduits and electric
cable raceways, making sure these are
protected from any mechanical damage.
TOOLS AND EQUIPMENT
FASTENING AND STARTING UP
,
,
,
,
,
,
.
Electrical connections
Control unit trimmer adjustments
Trimmer
= adjusting the sun level
sensitivity limit;
15 Klux (more sensitive) / 60 Klux (less
sensitive).
Trimmer
= adjusting the wind level
sensitivity limit;
5 Km/h (+ sensitive) / 40 Km/h (- sensitive).
DECLARATION
-
Came
Cancelli
Automatici S.p.A. declares that this device
is compliant with the essential requirements
and other pertinent measures established
by directive 2006/95/CE, 2014/30/UE.
Reference code to request an original copy:
XXXXX.
Dismantling
and
disposal
-
Before
proceeding it is always a good idea to check
your local legislation on the matter.
Other components (i.e. electronic cards,
transmitter batteries, etc.) may contain
hazardous substances. These must therefore
be handed over the specially authorised
disposal fi rms.
DO NOT DISPOSE OF IN NATURE!
The data and information in this manual may
be changed at any time and without prior
notice.
119T70521 - ver. 1.0
119T70521
1.0 - 01/2012