Connecting A Wi Reless Device; With Wi-Fi Protected Setup - USRobotics MAXg Guía Breve De Instalación

English
C o n g ra t u l a t i o n s . You have successfully completed the installation proce-
dure. You can verify your network connection by registering your Wireless
MAXg Access Point at www.usr.com/productreg/.

Connecting a Wi reless Device

The Wireless MAXg Access Point supports Wi-Fi Protected Setup™ (WPS). If
your wireless device also supports WPS, you can use it to connect the device to
the access point. See the documentation for your wireless device to determine
whether it supports WPS. If it does not, follow the instructions in "Without Wi-
Fi Protected Setup" on page 9.

With Wi-Fi Protected Setup

1. Be ready to start WPS on your wireless device.
2. Log in to the configuration pages of the access point:
If you know the IP address of the access point, simply type it in your Web
browser's location or address line and press ENTER. If you do not know the
IP address of the access point, follow one of the procedures below to find it:
U s i n g t h e N e t w o r k D e v i c e Lo c a t o r ( W i n d ow s U s e r s O n l y )
A. Windows Vista or XP: Click Windows Start > All Programs > USRo-
botics Network Device Locator.
All Other Windows Operating Systems: Click Windows Start > Pro-
grams > USRobotics Network Device Locator.
The locator displays its welcome screen.
B. Click Next.
The locator lists the access point as well as any other USRobotics devices
that were found:
C. Find the Wireless MAXg Access Point in the list. (If you have more than
one Wireless MAXg Access Point, find the device whose MAC address
matches the LAN MAC address on the bottom of the access point that
you are trying to access). Note the IP address associated with the LAN
MAC address of the access point.
D. Click Next.
M a n u a l l y F i n d i n g t h e I P A d d re s s o f t h e A c c e s s Po i n t
A. Access the configuration program or configuration pages of the network-
ing device connected to the access point. For detailed instructions, con-
sult the documentation for the networking device.
B. Find the list of clients associated with the networking device.
C. On the client list, find the LAN MAC address of the access point.
8