Dörr PS-16737 Manual De Instrucciones página 9

uSage
charging the li-ion battery
before first use, please charge the supplied Li-ion battery. For charging turn the torch
middle section (3) downwards. below the middle section you will find the Micro USb
port (4). Connect the torch to your computer using the supplied USb cable. While char-
ging, the LEd indicator (5) lights up red. After approx. 5 hours the Li-ion battery is fully
charged and the LEd indicator (5) lights up green.
replacing the li-ion battery
Screw-off the screw cap (2) counter clockwise. insert an appropriate Li-ion battery type
18650 according to the polarity (+/-) and screw on the cap again.
turn on/off the torch
To turn On/Off the torch press the rubberized On/Off button (1) at the bottom of the torch.
Brightness/Flashing modes
To adjust the brightness or for selecting the flashing mode press the On/Off button (1) in
quick succession as follows:
Press 1x 100% brightness
Press 2x 50% brightness
Press 3x 25% brightness
Press 4x flashing mode
Press 5x SOS flashing mode
Silent mode
For silent mode the torch must be turned off. Slightly press the On/Off button (1), without
pushing it down completely and without the audible click sound. by pressing slightly
again, the torch will switch through the functions like described above. during silent
mode you have to press constantly the On/Off button (1) slightly.
Zoom function
To zoom the light beam slide the zoom head (6) forwards or backwards.
cleaning
Never use aggressive cleansing agents or benzine to clean the torch. We recommend
a soft microfiber cloth to clean the outer parts of the torch.
9 9