System Requirements - Chicco DCS 932L Manual Del Usuario

SYSTEM REQUIREMENTS

In order to successfully install your camera, make
sure you have the following system requirements:
• Computer with Microsoft Windows® 8/7/Vista/
XP, or Mac with OS X 10.6 or higher
• PC with 1.3GHz or above and at least 128MB
RAM
• Internet Explorer 7, Firefox 12, Safari 4, or
Chrome 20 or higher version with Java installed
and enabled
• Existing 10/100 Ethernet-based network or
802.11g/n wireless network
• All iPhone and iPod Touch models that run iOS
4.3 or higher are compatible
• All Android devices that run Android 1.6 or
higher are compatible.
FEATURES
Simple to Use
The DCS-932L is a stand-alone system with
a built-in CPU, requiring no special hardware
or software for configuration and operation.
The DCS-932L supports both ActiveX mode
for Internet Explorer and Java mode for other
browsers such as Firefox® and Safari®.
802.11b/g/n Wireless or Ethernet/Fast Ethernet
Support
The DCS-932L offers wireless 802.11b/g/n and
Ethernet/Fast Ethernet connectivity, making the
DCS-932L easy to integrate into your existing
network environment. The DCS-932L works with
a 10Mbps Ethernet based network or 100Mbps
Fast Ethernet based network for traditional
wired environments, and works with 802.11b/g/n
routers or access points for added flexibility.
Mydlink Cloud service
Mydlink Cloud Service allows you to have always
access to your DCS-932L camera no matter
where you are.
You can monitor your camera via the Mydlink
portal from your laptop and App from portable
devices in your local area network and outside
through Internet.
IR LED for Day and Night functionality
The built-in infrared LEDs enables night time
viewing of up to 16 feet (5 meters).
The IR LED setting can be managed from the
dedicated App or from Mydlink portal.
Digital Zoom 4X
You can zoom in/out from the dedicated App or
from Mydlink portal.
Snapshot
This feature allows you to store pictures on your
laptop or portable device and relive the sweetest
moments of your baby growth. You can activate
the snapshot from the dedicated App or Mydlink
portal.
9