Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
SERVICE DATA SHEET
Appliance with Electronic Oven Control
NOTICE
This service data sheet is intended for use by persons having electrical and mechanical training and
a level of knowledge of these subjects generally considered acceptable in the appliance repair trade.
The manufacturer cannot be responsible, nor assume any liability, for injury or damage of any kind
arising from the use of this data sheet.
SAFE SERVICING PRACTICES
To avoid the possibility of personal injury and/or property damage, it is important that safe servicing
practices be observed. The following are some, but not all, examples of safe practices.
1. Do not attempt a product repair if you have any doubts as to your ability to complete it in a safe
and satisfactory manner.
2. Before servicing or moving an appliance, remove power cord from electric outlet, trip circuit
breaker to Off, or remove fuse.
3. Never interfere with the proper installation of any safety device.
4. USE ONLY REPLACEMENT PARTS SPECIFIED FOR THIS APPLIANCE. SUBSTITUTIONS MAY DEFEAT
COMPLIANCE WITH SAFETY STANDARDS SET FOR HOME APPLIANCES.
5. GROUNDING: The standard color coding for safety ground wires is GREEN OR GREEN
WITH YELLOW STRIPES. Ground leads are not to be used as current carrying conductors. IT IS
EXTREMELY IMPORTANT THAT THE SERVICE TECHNICIAN REESTABLISH ALL SAFETY GROUNDS
PRIOR TO COMPLETION OF SERVICE. FAILURE TO DO SO WILL CREATE A POTENTIAL HAZARD.
6. Prior to returning the product to service, ensure that:
• All electric connections are correct and secure.
• All electrical leads are properly dressed and secured away from sharp edges, high-temperature
components, and moving parts.
• All uninsulated electrical terminals, connectors, heaters, etc. are adequately spaced away from all
metal parts and panels.
• All safety grounds (both internal and external) are correctly and securely reassembled.
• All panels are properly and securely reassembled.
IMPORTANT NOTES
1. This unit includes an Electronic Oven Control board.
2. The included board is not field repairable.
3. The oven temperature can be calibrated, see Use and Care Manual.
4. The
pin on board connectors indicates pin number 1.
DATA SHEET ABBREVIATIONS AND TERMINOLOGY
EOC : Electronic Oven Control
LED : Light-Emitting Diode
MDL : Motor Door Latch
DLB : Double Line Break
RTD : Resistance Temperature Detector / Oven Probe
318047492 (1109) Rev. A
1
Printed in Canada
Publicidad
Resumen de contenidos para Frigidaire 318047492
- Página 1 SERVICE DATA SHEET 318047492 (1109) Rev. A Appliance with Electronic Oven Control NOTICE This service data sheet is intended for use by persons having electrical and mechanical training and a level of knowledge of these subjects generally considered acceptable in the appliance repair trade.
- Página 2 ILLUSTRATION OF OVEN CONTROLS ELECTRONIC OVEN CONTROL (EOC) Electric Models BAKE BROIL Gas Models Electronic Oven Control Legend: All models Electric models only P5 Connector Legend K9. DLB Relay P5-1. Bake P5-10. Normally Open (MDL) K1. Bake Relay P1. L1 Fast-on Tab P5-2. Broil P5-11. Normally Close (MDL) K2.
- Página 3 ELECTRONIC OVEN CONTROL (EOC) FAULT CODE DESCRIPTIONS Note: Generally speaking “F1x” implies a control failure, “F3x” an oven probe problem, and “F9x” a latch motor problem. In all occurrences the alarm is accompanied by a display of “F10”. Control has sensed a potential 1) Check RTD sensor probe and replace if necessary.
- Página 4 Oven Control Block Diagram (electric models) BLOCK DIAGRAM FOR ELECTRIC MODELS Oven Light Electronic Oven Control Light button Door Switch Neutral pin 1 = Not Used pin 2 = Not Used pin 3 = Not Used pin 4 = Not Used pin 5 = Neutral input Neutral pin 6 = Motor Door Latch AC output...
-
Página 5: Hoja De Servicio
HOJA DE SERVICIO 318047492 (1109) Rev. A Unidad con Control Electrónico de Horno NOTICIA Esta hoja de servicio esta dirigida a las personas con entrenamiento técnico y a los que tienen un buen nivel de comprensión en la reparación de estos aparatos. El fabricante no puede ser responsable de heridas o daños de algún tipo por el uso de esta hoja de información. - Página 6 ILUSTRACIóN DE CONTROLES DE HORNO CONTROL ELECTRóNICO DEL HORNO (EOC) Modelos eléctricos BAKE BROIL Modelos gas Leyenda del Control electrónico del horno (EOC) Todos los modelos Modelos eléctricos solamente Leyenda del conectador P5 P5-1. Hornear K9. Relevador DLB P5-10. Normalmente abierto K1.
-
Página 7: Calibración Eléctrica
DESCRIPCIóN DE LOS CóDIGOS DE ERROR DEL CONTROL ELECTRóNICO DEL HORNO Nota: Generalmente hablando "F1X" implica una falla del control. "F3X" un problema de la sonda, y "F9X" un problema del seguro de la puerta. 1) Verifique el sensor RTD y reemplácelo si es necesario. Si el El control del horno detectó una condición de escape posible. - Página 8 Oven Control Block Diagram (electric models) BLOqUE DIAGRAMA PARA LOS MODELOS ELÉCTRICOS Oven Light Electronic Oven Control Light button Door Switch Neutral pin 1 = Not Used pin 2 = Not Used pin 3 = Not Used pin 4 = Not Used pin 5 = Neutral input Neutral pin 6 = Motor Door Latch AC output...
- Página 9 FEUILLET DE DONNÉES TECHNIqUES 318047492 (1109) Rev. A Électroménager avec commande de four électronique. AVIS Cette feuille de données d'entretien est destinée aux personnes ayant reçu une formation en électricité et en mécanique, et qui possèdent un niveau de connaissance jugé acceptable dans l'industrie de réparation des appareils électroménagers. Le fabricant ne peut être tenu responsable, ni assumer aucune responsabilité, pour toute blessure ou dommage de quelque nature que ce soit pouvant résulter de l'utilisation de cette feuille de données.
- Página 10 ILLUSTRATION DES COMMANDES DU FOUR COMMANDE ÉLECTRONIqUE DU FOUR (EOC) Modèles Électriques BAKE BROIL Modèles à Gaz Légende de la commande électronique du four (EOC): Tous les modèles Légende du connecteur P5 Modèles électriques seulement P5-1. Cuisson P5-10. Normalement ouvert K1. Relais élément K9. Relais DLB Modèles P5-2.
- Página 11 DESCRIPTION DES CODES D'ERREURS DE LA COMMANDE ÉLECTRONIqUE DU FOUR (EOC) Note : De façon générale, “F1X” indique des erreurs internes de la commande du four, “F3X” un problème avec la sonde du four et “F9X” un problème avec le moteur verrou. La commande de four a décelé une 1) Vérifiez la sonde RTD et remplacez-la si nécessaire. Si le four condition d'emballement possible. surchauffe, coupez le courant. S'il continue de surchauffer une La commande présente un relais fois que le courant est rétabli, remplacez le EOC. en court-circuit, (RTD) mauvais fonctionnement de la sonde. Touches en court-circuit: si une 1) Appuyez sur ARRÊT.
-
Página 12: Electronic Oven Control
Oven Control Block Diagram (electric models) TABLEAU DES CONNEXIONS POUR MODÈLES ÉLECTRIqUES Oven Light Electronic Oven Control Light button Door Switch Neutral pin 1 = Not Used pin 2 = Not Used pin 3 = Not Used pin 4 = Not Used pin 5 = Neutral input Neutral pin 6 = Motor Door Latch AC output...