AVE Noir Serie Manual De Instrucciones página 14

Max. Connection distance from the answering unit: 50m with 0,5mm
•
Max. quantity of usable signals: 5
•
Max. Consumption at rated voltage, direct current:
•
- with L8 OFF: 15mA
- with L8 ON: 22mA
Max. Consumption at rated voltage, alternate current:
•
- with L8 OFF: 15mA
- with L8 ON: 37mA
Timed ringing bell (S2), switched on at the same time with "ENTER" L7 led to draw the
•
attention on the change in status:
- time setting of the "ENTER" (L7) optical signal/(S2) acoustic signal: 5 s ± 25%
- frequency of the "ENTER" (S2) two-sound acoustic signal: 1kHz ± 25% 1Hz intermittent
Front signalling leds:
•
- Red led "ENGAGED" (L5)
- Yellow led "WAIT" (L6)
- Green led "ENTER" (L7)
Illuminated label-plate
The front of the device is provided with a blue illuminated area (L8) (see figure1a) to be
completed with a label-plate to be inserted sideways (see fig. 1b) with mentions in diffe-
wire
2