Chamberlain PILCEV Manual De Instrucciones

OVERVIEW
The Smart Lamp Control offers a convenient way to control the
lights in your home. It can be programmed to be controlled
from anywhere with your smartphone and the Chamberlain
MyQ ® App*. The Smart Lamp Control is also compatible with
up to 8 Security+ 2.0 ® remote controls OR a combination of up
to 8 MyQ ® enabled garage door openers. This product is not
recommended for control of household appliance or fans. Not
for use with 3-way or 4-way switch combinations.
SPECIFICATIONS
Fluorescent ............................................................. 600W / 5A
Tungsten ................................................................. 600W / 5A
LED ......................................................................... 600W / 5A
Electronic Ballast (Fluorescent) ......................... 599W / 4.99A
Re-lamp with listed SBCFL only, 599W total, maximum
MODES OF OPERATION
The Smart Lamp Control can be programmed to the MyQ
SMARTPHONE OPERATION:
Allows you to activate the Smart
Lamp Control from your smartphone
or tablet and set schedules to switch
your lights on/off at
customized times.
INSTALLATION & PROGRAMMING
1
Plug the lamp into the Smart Lamp Control
and plug the Smart Lamp Control into an
electrical outlet (the LED on the Smart
Lamp Control will flash). NOTE: Make sure
the lamp is switched ON.
4
• Download the Chamberlain
MyQ ® App*.
• Create or sign-in to your
account and
follow the in-app
instructions to
add the Smart
Lamp Control to
your MyQ ®
account.
*Smartphone control requires a MyQ
TO ERASE ALL PROGRAMMING
Press and hold the Learn button on the Smart Lamp Control for 6
seconds. All programming is now erased.
Para Manual en Español ir a:
www.chamberlain.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A4275SP.pdf
Learn
Button
app*, to a Security+ 2.0
®
REMOTE CONTROL OPERATION:
Allows you to activate
the Smart Lamp Control
from a remote control.
2
If the lamp is not ON, press and release
the Power button on the Smart Lamp
Control to turn the lamp ON.
Press the button on
OR
the remote control.
® Garage, Smart Garage Hub, MyQ
MODELS PILCEV, PILCEV-P1, PILCEVC & PILCEVC-P1
Power Button
To prevent possible SERIOUS INJURY or DEATH from
electrocution or fi re, the light control is ONLY for indoor
use.
NOTICE: To comply with FCC and/or Industry Canada (IC) rules. adjustment or
modifications of this transceiver are prohibited. THERE ARE NO USER
SERVICEABLE PARTS.
This device complies with Part 15 of the FCC rules and IC RSS-210. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
LED Lamp
Outlet
WARNING: This product can expose you to
chemicals including lead, which are known to the
State of California to cause cancer or birth defects or
other reproductive harm. For more information go to
www.P65Warnings.ca.gov
remote control, or to a MyQ
®
GARAGE DOOR OPENER OPERATION:
Allows you to synchronize the Smart Lamp
Control with your garage door opener
lights. Example: The garage door opener
lights are set to automatically turn off after
4 ½ minutes, the Smart Lamp Control will
also turn off after 4 ½ minutes.
Press the Learn button on
OR
the garage door opener.
® Internet Gateway, or Wi-Fi ® Garage Door Opener.
ONE YEAR LIMITED WARRANTY
The Chamberlain Group, Inc. warrants to the first consumer purchaser of
this product that it is free from defect in materials and/or workmanship
for a period of 1 year from the date of purchase.
SMART LAMP CONTROL
enabled garage door opener.
®
3
Press and release the Learn button on
the Smart Lamp Control (the LED on
the Smart Lamp Control will light).
The lamp's light bulb will blink and
the LED on the Smart Lamp Control
will turn OFF when the device has
been programmed.
1-800-528-9131
www.chamberlain.com