Installation - Existing Construction - HAMPTON BAY 7107-03 Guía De Uso Y Cuidad

Installation - Existing Construction

1
Remove the existing fan
 Remove the old fan from the ceiling.
2
Measure the ceiling opening
 Measure the opening to ensure it is large enough to
accommodate the new fan body (A) (10.8 in. x 10.5 in.).
3
Enlarge the opening (optional)
 If this fan is not replacing an old fan, be sure to cut a
10.8 in. x 10.5 in. opening for the fan body (A).
MAKE SURE ONE EDGE OF THE OPENING IS FLUSH
WITH THE JOIST FOR INSTALLATION FROM BELOW.
INSTALLATION FROM ABOVE WITH SUSPENSION BRACKETS (ATTIC ACCESSIBLE) ONLY IF UNABLE TO ATTACH DIRECTLY TO JOIST
1
Removing duct connector
 Remove the duct connector from the fan housing.
 Insert the fan housing into the opening cut in the drywall.
8