Objecto F1 Manual De Usuario página 12

(2) Move both lock release switches outward at the same time, and pull the
front guard forward to remove it.
(2)
(3) Turn the blade-mount spinner clockwise and remove the blades.
Mounting
(4) To mount the blades, fit them to match the shape of the motor shaft,
firmly turn the blade-mount spinner counterclockwise, and tighten.
(5) Place the hook at the bottom of the front guard in the recess at the
bottom of the rear guard and then fit the lock release switch on the
top.
(5) (5)
Storage
• Clean by removing dust on the front and rear guard vents with a vacuum cleaner.
• After thorough cleaning, dry the fan well.
• Place in a plastic bag, etc., put in the original box, and store in a location without
humidity.
• When not using for a long time, remove the remote control battery.
Lock release switch
(2)
(4)
Fit the blades to match the shape of the motor shaft
Recess
Rear guard
Front guard
12
English