Safety Features - Comfort Home Products B Disc 6 Manual De Instrucciones

16. This heater draws 12.5 amps during operation. To prevent overloading a circuit,
do not plug the heater into a circuit that already has other appliances working.
17. Do not use outdoors
"SAVE THESE INSTRUCTIONS"
PRE-OPERATING INSTRUCTIONS
1. Carefully remove your heater from box. (Please SAVE the Box for off season
storage).
2. Make sure the heater is switched OFF before plugging the heater into the
outlet. Connect to properly grounded outlets only. Note: The power cord has a
polarized plug (with one blade wider than the other) that will only fit in a
polarized outlet one way. If it does not insert easily try reversing the plug. If it
still does not fit contact your electrician to replace your outlet. DO NOT defeat
the safety purpose of the polarized plug.
3. Place heater only on a firm level surface, free from obstructions and at least 3
ft. away from any wall or other objects such as curtains, plants, etc.
4. Avoid overloading your circuit by not using other high wattage appliances in the
same outlet.

SAFETY FEATURES

For added safety, your DiscFurnace is equipped with a tip-over safety
switch and a thermal cut-off overheat protection device.
FOR SAFETY REASONS, IF THIS PRODUCT OVERHEATS DUE TO
ABNORMAL CONDITIONS THE CERAMIC DISC HEATING ELEMENT
WILL SHUT OFF AUTOMATICALLY
TO RESTORE OPERATION, PLEASE UNPLUG THE UNIT AND
ALLOW TIME FOR THE THERMAL CUT-OFF OVERHEAT
PROTECTION DEVISE TO COOL OFF
PLEASE READ BEFORE OPERATING
WARNING
3