Siliceo MiniDV YSB-001 Guia De Inicio Rapido página 8

5. Shut off the machine
In the video or standby state, press the Power button 3 seconds, release the button until the
indicator light is off. It means the machine has been shut off.
6. Automatic shut-off function:
In the following circumstances: MINI DV will save the video data and shut off automatically.
a. The machine is lack of electricity when you are videoing. The system will save the video content
first, and then shut off automatically.
b. When the MINI DV disk space is full, after the indicator light flashing instantaneously, the
machine will save the file and shut off automatically.
c. In the standby mode, without any operation for 45 seconds, the system will automatically shut
off.
7. Connect the computer
In the state of off-the-power, standby mode or videoing mode, the machine can be connected to
the computer directly. It can be used as a U disk after that and the document can be freely copied,
pasted, deleted.
Insert the machine into the computer USB port, the removable disk logo will appear after a few
seconds. The red light will always lighting, the blue light will flashes instantaneously first and then
always lighting.
Tips:
a. After connecting the computer, if the computer does not recognize the machine or there is still
no removable disk logo after 30 seconds, please re-plug it again.
b. Proposing copy or shear the well-recorded video file to your computer hard disk first and then
display it. If you broadcast the file in the recorder's built-in video memory directly, the play may be
not smooth, it is probably because the data is excessive and the data transmission can not keep
up.
8. PC Video Camera Features:
You should install the driver before you first use D001 as a PC video camera. The driver named
SPCA1528_V2220_M ... Setup.exe, it is in the gifted CD. Double-click the file, follow the installation
prompts to complete the installation, there will have a AMCAP icon on the desktop after
installation.
In the state of off-the-power or booting, use USB lines to connect the computer, the state is the
U disk mode, shortly press MODE button, it will switch to the computer video camera mode at this
time. Click the icon AMCAP, then it can be used as the computer video camera.
MANUAL MINIDV MD80
SILICEO ONLINE WWW.SILICEO.ES