TechniSat DVB-С Serie Guía Rápida página 5

Help
If included, a help text can be faded in or out by pressing the blue function key in the menu.
Initial Installation
When operating the unit for the first time, the start window of the installation assistant Auto
Install appears. Please follow the instructions on the screen. If the initial installation is not run or
canceled, the unit will be started with the standard configuration.
For daily use
Switching on and off
> Turn on the Digital-Receiver by pressing the On/Standby button on the remote control or on the
unit itself.
> By pressing the button again, the unit is turned off.
Choosing programs
Using the up/down keys:
> Switch programs, one at a time, using the up/down program keys on the remote control or on
the unit.
Using the number pad:
> Using the number pad input the program number. For example:
1 for program 1, 1, then 4 for program 14, 2, then 3, then 4 for program 234.
When inputting program numbers, you have about 3 seconds after pressing a key to complete the
number. If you have a single or double-digit number to input, you can speed up the process by
holding the last key pressed.
Using the program list:
> Press the "OK" key.
> Now you can choose the program you wish by using the up and down arrow keys.
> By pressing the "OK" key, the highlighted program is selected.
> With the up and down arrow keys, you move the highlighted area up or down one line.
> With the left and right arrow keys, you change list pages.
Returning to the last selected program:
> By pressing the "back" key on the remote control, the last selected program is re-selected.
> Press the key again and the last program seen is selected.
After each program change, an Info box appears with the program number and name of the
selected program, like with Video Text, 16/9 shows or for encrypted content. If a TV show is
available in multiple languages or lines, or in the case of radio programs, more than one
program is available under a single program spot; this information will also be blended in. In this
case, you can choose a language or line using the following method:
> Press the "Option" key. A list of the current languages available will appear on the screen.
> Select the language and or radio program with the up and down arrow keys and confirm with
"OK".
Now you can hear the program in the chosen language. The reception of mono programs is also
possible with your digital receiver.
5