Important Safeguards - Cuisinart CBM-18 Guia De Inicio Rapido

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. Read all instructions.
2. Unplug from outlet when not in use, before putting on or taking
off parts, and before cleaning.
3. To protect against risk of electrical shock, do not immerse
cord, plug or grinder in water or other liquid.
4. Close supervision is necessary when any appliance is used
by or near children.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug,
or after the appliance malfunctions, or is dropped or damaged
in any manner. Return appliance to the nearest authorized Cuisinart
service facility for examination, repair, or mechanical
or electrical adjustment.
7. The use of attachments not recommended or sold by Cuisinart may
cause fire, electrical shock, or risk of injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch
hot surfaces.
10. Before using, check hopper for presence of foreign objects.
11. Use this appliance to grind roasted coffee beans only. Grinding other
substances, such as nuts, spices or unroasted beans, may
dull the blade and cause poor grinding or injury.
12. Do not use appliance for other than intended use.
13. Do not place this appliance on or near a hot gas or electric
burner, or in a heated oven.
14. Do not operate your appliance in an appliance garage or under a wall
cabinet. When storing in an appliance garage, always unplug the
unit from the electrical outlet. Not doing so could create a risk of
fire, especially if the appliance touches the walls of the garage or the
door touches the unit as it closes.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
NOTICE
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.